4.
Place the server on a flat, level work surface.
To replace the server, reverse the removal procedure.
Removing the access panel
IMPORTANT:
The left and right sides of the chassis are oriented 180° from each other. Components
installed on one side of the chassis must be turned 180° when they are installed on the opposite side.
Procedure
1.
Power down the server (
on page 16).
2.
Remove the server (
on page 17).
3.
Place the server on a flat, level work surface.
4.
Remove the access panel.
To replace the component, reverse the removal procedure.
Opening the front bracket
IMPORTANT:
The left and right sides of the chassis are oriented 180° from each other. Components
installed on one side of the chassis must be turned 180° when they are installed on the opposite side.
18
Operations
