manualshive.com logo in svg

Hewlett Packard Enterprise HPE ProLiant XL230k Gen10, User Manual

Share
Download
Hewlett Packard Enterprise HPE ProLiant XL230k Gen10 User Manual Download Page 52

9.

Reattach the HPE Smart Storage Battery bracket to the front bracket.

10.

Close the front bracket.

11.

Route and connect the cable to the controller.

HPE Trusted Platform Module 2.0 Gen10 option

Overview

Use these instructions to install and enable an HPE TPM 2.0 Gen10 Kit in a supported server. This option is
not supported on Gen9 and earlier servers.

This procedure includes three sections:

1.

Installing the Trusted Platform Module board.

2.

Enabling the Trusted Platform Module.

3.

Retaining the recovery key/password.

HPE TPM 2.0 installation is supported with specific operating system support such as Microsoft

®

 Windows

Server

®

 2012 R2 and later. For more information about operating system support, see the product

QuickSpecs on the Hewlett Packard Enterprise website (

http://www.hpe.com/info/qs

). For more information

about Microsoft

®

 Windows

®

 BitLocker Drive Encryption feature, see the Microsoft website (

http://

www.microsoft.com

).

CAUTION: 

If the TPM is removed from the original server and powered up on a different server, data

stored in the TPM including keys will be erased.

52

Hardware options installation

Summary of Contents for HPE ProLiant XL230k Gen10



















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands