3.
Install the drive.
4.
Observe the LED status of the drive.
Installing a processor-heatsink assembly
Hewlett Packard Enterprise recommends identifying the processor heatsink module components before
performing this procedure. See "
Processor, heatsink, and socket components
on page 12."
IMPORTANT:
The left and right sides of the chassis are oriented 180° from each other. Components
that are installed on one side of the chassis must be turned 180° when they are installed on the opposite
side.
IMPORTANT:
In a single processor configuration, processor 2 is not used.
IMPORTANT:
HPE ProLiant and HPE Synergy Gen10 server products do not support upgrading to
Second Generation Intel Xeon Scalable Processors at this time. For more information, see the product
QuickSpecs on the Hewlett Packard Enterprise website (
NOTE:
Install the rear heatsink on processor 1 and the front heatsink on processor 2.
Prerequisites
Before installing this option, be sure that you have the following items:
• The components included with the hardware option kit
• T-30 Torx screwdriver
Procedure
1.
Observe the following alerts:
26
Hardware options installation
