10.
Install the rear support bracket.
11.
Install the access panel (
on page 18).
12.
Install the server into the chassis (
on page 14).
13.
Press the Power On/Standby button.
The server exits standby mode and applies full power to the system. The system power LED changes
from amber, to flashing green, and then to green.
Installing a PCIe I/O riser card
IMPORTANT:
The left and right sides of the chassis are oriented 180° from each other. Components
that are installed on one side of the chassis must be turned 180° when they are installed on the opposite
side.
The server supports the following PCIe I/O riser options:
• HPE XL230k x16 LP PCIe External I/O Riser Kit
• HPE XL230k x8 PCIe Internal-External I/O Riser Kit
• HPE XL230k x8 PCIe Internal I/O Riser Kit
NOTE:
When installing the HPE XL230k x16 LP PCIe External I/O Riser Kit or the HPE XL230k x8 PCIe
Internal-External I/O Riser Kit, you must also install HPE XL230k External I/O Module in the chassis.
For more information about product features, specifications, options, configurations, and compatibility, see the
product QuickSpecs on the Hewlett Packard Enterprise website (
).
Procedure
1.
on page 16).
2.
on page 17).
3.
Place the server on a flat, level work surface.
38
Hardware options installation
