WARNING: The front panel Power On/Standby button does not shut off system power. Portions of the power supply
and some internal circuitry remain active until AC power is removed.
To reduce the risk of personal injury, electric shock, or damage to the equipment, remove power from the system:
• For rack and tower servers, remove the power cord.
• For server blades and compute modules, remove the server blade or compute module from the rack.
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the internal system
components to cool before touching them.
2. Update the system ROM.
Locate and download the latest ROM version from the
Hewlett Packard Enterprise Support Center website. Follow the
instructions on the website to update the system ROM.
3. Update the system ROM.
www.hpe.com/support/hpesc). To update the system ROM, follow the instructions on the website.
4. Power down the system.
a. Shut down the OS as directed by the OS documentation.
b. To place the system in standby mode, press the Power On/Standby button. When the system enters standby power
mode, the system power LED changes to amber.
c. Disconnect the power cords (rack and tower servers).
5. Do one of the following:
• Remove the system from the rack, if necessary.
• Remove the system or system blade from the rack.
6. Place the system on a flat, level work surface.
7. Remove the access panel.
8. Remove any options or cables that may prevent access to the TPM connector.
9. Proceed to Installing the TPM board and cover.
Installing the TPM board and cover
Procedure
1. Observe the following alerts:
CAUTION: If the TPM is removed from the original system and powered up on a different system, data stored in the
TPM including keys will be erased.
Hardware options installation
115
