Item
Description
1
Type-p Smart Array controller connected to the controller backup power connector
2
Energy pack connected to the energy pack connector
Your server might appear different.
f. Install the expansion board or controller. Verify that it is firmly seated in the slot.
9.
To install a full-height, half-length PCIe x16 expansion board, the two-slot PCIe riser cage option is required. To install an
expansion board or type -p controller in this riser cage, do the following:
a. Remove the PCIe riser cage (Remove the PCIe riser cage).
b. Remove the riser slot cover.
c. If installing an expansion board, verify that any switches or jumpers on the expansion board are set properly. For
more information, see the documentation that ships with the option.
d. Connect the cables to the expansion board or type -p controller (Cabling).
e. Install the expansion board or controller. Verify that it is firmly seated in the slot.
Hardware options installation
82
