Hewlett Packard Enterprise Apollo 4200 Gen10, User Manual

Page: 76 / 159

9. Connect the cables to the PCIe in slot 2.
10. Install the air baffle (Install the air baffle ).
11. Install the access panel (Install the access panel).
12. Install the system into the rack (Installing the system into the rack).
13. Power up the system (Power up the system).
M.2 SSD enablement board option
The M.2 SSD enablement board is supported in the following expansion slots:
• For standup installation: PCIe3 x16 expansion slot 1, PCIe3 x24 expansion slot 2.
• For horizontal installation (two-slot PCI riser cage option required): PCIe3 x 8 riser board slot 3 and 4
For more information about product features, specifications, options, configurations, and compatibility, see the product
QuickSpecs on the
Hewlett Packard Enterprise website.
Installing the M.2 SSD enablement board
Procedure
1.
Power down the system (
Power down the system).
2.
Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the system.
3. Remove the system from the rack ( Remove the system from the rack).
4.
Place the system on a flat, level work surface.
5.
Remove the access panel (
Remove the access panel).
Hardware options installation
76