a. Determine the status of the drive from the NVMe LEDs (NVMe drive components and LEDs).
b. Press the power button.
The Do Not Remove button illuminates and flashes.
c. When the Do Not Remove button stops flashing and the icon on the button is no longer illuminated, press the Do
Not Remove button to release the release lever.
d. Pull the release lever to disengage the drive from the backplane, and slide the drive out of the drive bay.
• Remove a uFF drive
b. Remove the drive.
Remove the system from the rack
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives, power supplies, and internal system
components to cool before touching them.
Operations
40
