10/2
8
SET MAIN
TIME SWITCH
(1)
The controller's internal main time switch (1) (if enabled for use) can be easily programmed
for any combination of ON/OFF switching times for any day of the week. The controller
comes preset with factory default settings for operating the system: Monday to Friday from
08:00 (event 01) until 17:30 (event 02). To edit settings, press the fascia button labeled
“
ENTER
” and scroll down through the menu tree until “
SET MAIN
TIME
SWITCH (1)
” is
displayed. Press the “
ENTER”
button to open this menu. The existing detail for switching
event 01 is displayed. Unlike other time switches, this controller has very flexible
unassigned switching events (instead of fixed sequential ON then OFF routines). Time
switching events can be set to switch (change state) at any time & day/s, and set as a
switching ON event or OFF event. Typically the switching events would be programmed in
the order of ON events (with common days & time) followed by an OFF event with matching
days and common OFF time, but any variation is easily programmed. As an example:
switching events could be programmed such that switching event 1 (01) turns the system
ON for Monday to Friday at 08:30, followed by event 2 (02) turning the system ON Saturday
& Sunday at 09:00, then event 3 turning the system OFF Monday to Sunday at 17:30. With
this programming approach, multiple & varied ON / OFF events can be set on individual or
groups of days, plus there is no issue switching past midnight which most other time
switches cant achieve. 18 switching events are available.
HEVAC CONTROL AGENCIES PTY LTD. 7/54 HOWLEYS RD.
NOTTINGHILL, VIC. 95627888
www.hevac.com.au
06/11
/19
Set EVENT a
s
an
ON or OFF
switching
event
enable the event
set days
set time
switching events
