en
12.2020 / Rev. 02
AB66005
48 / 174
Operation
6.8.2
Functional description of manual mode
In manual mode, an adjustable temperature is held constantly. With
temperature drops
‘Editing or deleting temperature drop’
on page 62, you can raise or lower the temperature setpoint to a
definable value at certain times. Manual mode can be started with a
time delay.
The temperature drop in manual mode is only avail-
able on incubators with a cooling unit.
−
By the addendum "R" in the type designation on
the front of the incubator (R = Refrigeration).
−
By the sales number, last digit 6 = cooled incu-
bator.
−
On the nameplate, by items 7 to 9
Chapter 9.8 ‘Type plate’ on page 144.
When manual mode is activated, you can create, edit, delete or start
programs for program mode
In manual mode, the control contact can be used
If a program is started while manual mode is active,
manual mode is ended.
In manual mode, multiple temperature drops can be created. Addi-
tions and changes to the temperature drop can also be made during
incubator operation.
If the incubator is switched off while manual or pro-
gram mode is running, when the incubator is
switched on, it indicates that a power failure was
registered.
Summary of Contents for HettCube 200
