en
12.2020 / Rev. 02
AB66005
130 / 174
Troubleshooting
No.
Fault description
Cause
Remedy
37
Error 37
The temperature set in temper-
ature guard 3.2 was exceeded.
The set temperature setpoint is
higher than the set temperature
of class 3.2.
Please acknowledge the message
with
[X]; The customer decides
what to do next after checking the
samples. The temperature guard
settings must be adapted
The temperature set in temper-
ature guard 3.2 was fallen short
of. The set temperature setpoint
is lower than the set tempera-
ture of class 3.2.
Please acknowledge the message
with
[X]; The customer decides
what to do next after checking the
samples. The temperature guard
settings must be adapted
The temperature set in temper-
ature guard 3.2 was fallen short
of. The door was open for too
long and the actual temperature
deviates from the temperature
setpoint.
38
Error 38
The door is open.
Please close the door.
39
Error 39
Door was closed.
Message
‘No 38’ remains for three
seconds and then disappears. The
message can be more quickly
removed by acknowledging with
[X].
40
Error 40
The current program is
stopped.
If the
[Start] button is pressed, the
program continues.
42
Error 42
This is not an error, but a
warning for the user that there
was a power failure. The pro-
gram is continued based on the
user settings (Power failure/
Time).
Please acknowledge the message
with
[X]; The customer decides
what to do next after checking the
samples.
44
Error 44
No SD card was detected.
Restart the system. Check whether
further operation is possible.
If the error appears again: Call
Service; Provide the device type,
serial number and error number.
45
Error 45
The communication between
the touchscreen and controller
is interrupted.
Restart the system. Check whether
further operation is possible.
If the error appears again: Call
Service; Provide the device type,
serial number and error number.
Summary of Contents for HettCube 200
