en
12.2020 / Rev. 02
AB66005
62 / 174
Operation
Fig. 75: ‘Manual mode
Temperature
drop’
Editing or deleting temperature drop
Fig. 76: ‘Manual mode
Temperature
drop
Editing’
1
[Edit temperature drop] button
Item
Designation
Description/function
1
[Confirmation] button
After you have made all settings, you can confirm this with
this button.
2
Starting time
Enter the starting time (date and time).
3
Duration
You can define the temperature drop via a start and end
time or via the start time and specifying the duration of the
temperature drop here. The end time is then calculated
automatically.
4
End time
Specify the end time of the temperature drop. The duration
is then adjusted accordingly.
5
[Cancel] button
If the
[Cancel] button is pressed, the dialogue is closed and
you will go back to the previous dialogue. All changes will
be discarded.
6
Button
[Delete]
You can delete the temperature drop by pressing the
[Delete] button.
7
Interval repetition
Specify the repetition interval of the temperature drop.
The lines in the calendar mark the temperature drops. The dots at
the beginning and end of the line mark the start and end days of the
drop.
Temperature drop settings can only be made for the
future, not for the past.
To delete a temperature drop, proceed as follows:
1.
Tap on the
[Edit temperature drop] button.
Summary of Contents for HettCube 200
