Hercules Wireless N Router
HWNR-300
90/101 – User Manual
The
remote IP address
and
remote port
correspond to the computers which communicate
with the Internet. In this case, the QOS rules only
apply to data streams coming from the Internet to
a computer in the local network.
- Select a
traffic type
: FTP, HTTP (websites),
SMTP and POP3 (email management).
- Select the
protocol
: TCP, UDP or both.
- Click
Apply
to validate the new settings.
Rules applied to the Router are displayed in the
table.
- Click
Modify
to apply the rule.
5.4.2.Configuring the DHCP server
This chapter will explain how to configure the internal DHCP server which manages the IP addresses of your
computers.
- On the home page, click the
Advanced
settings
button.
- Select
Router's IP configuration
.
- You can modify the
Router's IP address
(192.168.2.1, by default) and its
subnet mask
(255.255.255.0, by default).
Be sure to make a note of this IP address.
Without it, you will not be able to reconnect to
your Router.
- If you
enable DHCP
, you can modify the
start
IP address
(192.168.2.2, by default), the
end IP
address
(192.168.2.128, by default) and the
lease time
for these addresses (
Forever
is the
default value).
- If you
do not enable DHCP
, you decide to set
the IP address for each computer yourself.
- You can assign a
domain name
to this server
and a specific
IP address
according to the
computer's
MAC address
.
