Hercules Wireless N Router
HWNR-300
26/101 – User Manual
- Click
Next
to move on to
step 3: Enabling your
WiFi network
.
If you connect to the Internet via an ADSL Ethernet modem:
- Select the
PPPoE
connection type.
- Enter your
connection username (login)
and
password
.
This information can be found in the membership
details sent to you by your ISP.
- Also enter a valid
MTU
value.
The
MTU
value corresponds to the maximum
value, in bytes, of transmitted data packets (for
example, 1500 bytes on an ADSL WiFi network).
- If you wish, you can
always stay connected
,
thereby leaving your Internet connection enabled
all the time; you can also choose to
disconnect
automatically
after a certain length of time.
- Click
Next
to move on to
step 3: Enabling your
WiFi network
.
If you use another connection mode (PPTP or L2TP)
- For information on your connection mode, please verify your connection information found in the
membership details sent to you by your ISP.
- If you select the
PPTP
connection type:
- Select
PPTP
in the drop-down list.
- Enter the
host name
supplied when subscribing
to the service.
- If necessary, click the
Clone
button to clone your
PC's MAC address.
- Enter your
connection username (login)
and
password
.
- Also enter the
PPTP gateway
and, if you wish, a
connection ID for this gateway.
This information can be found in the membership
details sent to you by your ISP.
- Enter a valid
MTU
value.
The
MTU
value corresponds to the maximum
value, in bytes, of transmitted data packets (for
example, 1500 bytes on an ADSL WiFi network).
- Click
Next
to move on to
step 3: Enabling your
WiFi network
.
