Henny Penny KVE-071, Operator'S Manual

Page: 48 / 56

July 2014 41
The 4-digit passwords can be changed for access to Set-Up, Usage,
Level 1, Level 2, & Get Mgr.)
1.
Press and hold and buttons until LEVEL - 2 shows in the
display, followed by ENTER CODE.
2.
Enter code 1, 2, 3, 4 (first 4 product buttons). “PROD” and
“COMP” show in the displays.
3.
Press ▼ button twice and “PASSWORD” shows in the display.
4.
Press right
√
button and “SET UP” shows in display. The Set up
password can be changed at this time, or press ▼ once to change
the USAGE password, twice for LEVEL 1 password, 3 times for
LEVEL 2 password, or 4 times for GET MGR password. And then,
follow instructions below.
5.
If the password for the Set Up Mode (for example) is to be
changed, press right
√
button and “MODIFY? “YES NO”
shows in the display. Press right
√
button to change the 4-digit
password for the Set Up Mode, using the product buttons
.
6.
Once new password is entered, “CONFIRM PASSWORD” shows
in the display. Press
√
button to confirm, or press X to choose
another password.
1.
Press and hold and buttons until “LEVEL - 2” shows in
the display, followed by “ENTER CODE”.
2.
Enter code 1, 2, 3, 4 (first 4 product buttons). “PROD” and
“COMP” show in the displays.
3.
Press ▼ button 3 times and “ALERT TONE” shows in the display.
4.
Press right
√
button and “VOLUME” shows in the display,
along with the volume value. Use the product buttons
to set the volume from 1 (softest) to 10
(loudest).
5.
Once volume is set, press
√
button and “TONE” shows in
display, along with the tone value. Use the product buttons
to set the tone from 50 to 2000 Hz.
6.
Press X to exit Alert Tone Mode.
5-4
ALERT TONE
(AND VOLUME)
5-3
PASSWORD