Henny Penny KVE-071, Operator'S Manual

Page: 41 / 56

In 12-hour clock mode, there are three items on each line: the start time
July 2014 34
.
“XX:XX”, the A or P (am/pm) setting, and the “XX” duration. Use the ◄
and ► buttons to set these items, which flashes when the item is selected.
To set a new start time setting, use the product buttons
, to enter the new value.
Press the ► button to step over to the AM/PM setting. The A or P can
be toggled by pressing the ‘0’ product button.
Press the ► button again to step over to the duration value
(in minutes). Enter a new value using the product buttons,
In 24-hour clock mode, there are only two items on each line: the time
(XX:XX) and the duration (XX). Again, the ◄ and ► buttons step you be -
tween these items.
Press the right-side X button to exit out of AIF Clock programming mode.
Put on protective gear: Be sure to use all approved safety equipment
including, apron, face shield and gloves. Never begin Deep Clean
process until you’re wearing all safety gear. Hot oil or water can cause
severe burns.
1.
Cover adjoining vats to avoid accidentally contaminating oil with
fryer Deep Clean solution.
Do not cook product in an adjoining vat when the Deep Clean process is in
progress to avoid contaminating the oil and product.
2.
Press and hold and buttons until LEVEL - 1 shows in the
display, followed by ENTER CODE.
3.
Enter code 1, 2, 3, 4 (first 4 product buttons). “PRODUCT” and
“SELECTN” show in the displays.
4.
Press ▼ button twice and “DEEP CLEAN” shows in the displays.
Press
√
button and display shows “DEEP CLN?”, along with “YES
NO”. Press
√
button. Full vat fryers, go on to step 6.
4-2.
AIF CLOCK
(CONT.)
4-3
DEEP CLEAN MODE