Henny Penny KVE-071, Operator'S Manual

Page: 23 / 56

July 2014 16
A dedicated display means, one product always shows in the display of
a particular vat.
1.
Once out of the Melt Cycle, LOW TEMP flashes until the setpoint
temperature has been reached. No cook cycles can be started while
“LOW TEMP” shows in the display. Once the set-point temperature
has been reached, the product name now shows in the display, ex:
NUGGETS, and product now can be placed in the oil.
2.
Press a timer button or .
3.
Display shows the name of the product cooking (ex: “NUG”) and
the timer counting down.
A “DUTY” alarm may sound indicating to shake the basket for
example.
4.
When cook cycle is complete, an alarm sounds and display shows
“PULL”.
5.
Press the timer button under PULL to stop the alarm, and lift basket
from vat.
6.
If a Quality Timer (hold timer) has been programmed, the hold time
starts automatically when the user presses the timer button to end
the cook cycle. While the quality timer counts down, the display
shows the three-digit product abbreviation followed by “Qn”,
where “n” is the number of minutes remaining.
ex: “FRY” / “Q5” / “FRY” / “Q5” / “FRY” / “Q4”, etc.
At the end of the timer countdown, the control beeps and the
display shows “QUAL” followed by the three-digit product name:
“QUAL” / “FRY” / “QUAL”/ “FRY”. Press the timer button to
cancel the timer.
To change the dedicated product, press the desired product button,
ex: and “<<<< >>>>” shows in the display.
Then press and hold (for 5 seconds) the timer button or
for the vat to be used. The product name now shows in the display, ex
“HASH BRN”.
3-5
COOKING WITH
DEDICATED DISPLAY