Henny Penny FlexFusion ELECTRIC SPACESAVER FSE-610, Service Instructions Manual, Page: 69 / 80

Error messages
69 Service-instructions
11.12 Water pressure during WaveClean too low
Description
Description This fault message is displayed if the pressure switch registered a
water pressure that is too low during WaveClean's. The program is
stopped until the water pressure is sufficiently high again.
Troubleshooting Ensure on-site water supply to soft water connection of unit. The
supply pressure on the water connection must be at least 2 bar. If the
fault occurs sporadically, check the on-site water pressure while
observing nearby water consumers.
Troubleshooting
Ensure customer-supplied water supply on the soft water connection
of unit. The supply pressure on the water connection must be at least
2 bar. If the fault occurs sporadically, check the on-site water
pressure while observing nearby water consumers.
3727002-0B-AE-12/15/2022