manualshive.com logo in svg

Henny Penny FlexFusion ELECTRIC SPACESAVER FSE-610, Service Instructions Manual, Page: 29 / 80

Share
Download
Henny Penny FlexFusion ELECTRIC SPACESAVER FSE-610 Service Instructions Manual Download Page 29

Service menu - appliance test

29

Service-instructions

6.12 Select signal tones

Set signal tones

Set the profile by adjusting the rollers.
Tap the "OK" field.

Changes saved.

Canceling the selection

Tap the "Back" field.

6.13 POS activation

Description

Software activation for the optional connection to a customer-supplied
performance optimization system.

INFORMATION

An additional modification of the appliance is required. With activation without

retrofitting, the heating circuit will not be activated.

Overview

Changing the setting

Touch the "OK" field.

Change saved.

Automatic restart of the software.

Canceling the selection

Touch the "Back" field.

6.14 Log data export

Description

Log data export to an external USB flash drive. The function is only
required after consultation.

Exporting log data

Perform according to instructions on the touchscreen.
Touch the 

Confirmation 

field.

Log data export begins.

3727002-0B-AE-12/15/2022

Summary of Contents for FlexFusion ELECTRIC SPACESAVER FSE-610

















































































Reviews:

No comments