manualshive.com logo in svg

Henny Penny FlexFusion ELECTRIC SPACESAVER FSE-610, Service Instructions Manual, Page: 58 / 80

Share
Download
Henny Penny FlexFusion ELECTRIC SPACESAVER FSE-610 Service Instructions Manual Download Page 58

Error messages

58

Service-instructions

Is the wire or the test prod damaged physically?

Remove existing core temperature sensor from the control board A1, X24 and

plug in new core temperature sensor. Error eliminated?

Replace control board.

Replace core temperature sensor.

No

Yes

11.4 Water vapor sensor defective (710)

Description

In the event of an error, emergency operation is activated and
displayed automatically. The software controls steam elimination. In
this case, increased water consumption may result.

Troubleshooting

Check contacting from cooking chamber sensor to control board A1 X27. Error eliminated?

Remove connector of existing vapor sensor from control board A1 X27 and plug in new vapor

sensor. Error eliminated?

Replace control board.

Replace vapor sensor.

No

Yes

3727002-0B-AE-12/15/2022

Summary of Contents for FlexFusion ELECTRIC SPACESAVER FSE-610

















































































Reviews:

No comments