Henny Penny Evolution Elite EEG-16 Series, Technical Manual

Page: 45 / 98

Level
2
Programming
33
• ST-16 System RAM Fade Count
• ST-17 Cook RAM Fade Count
• ST-18 Product RAM Fade Count
• ST-19 Stat RAM Fade Count
• ST-20 RAM Data Error Count
• ST-21 Data Total Loss Count
• ST-22 User Initialization Count
• ST-23 Automatic Initialization Count
• ST-24 Cooks Count per Product
• ST-25 Cook Cycle Stop Counts
– ST-25A = number of stops in the first 30 sec.
– ST-25B = 0
– ST-25C = 0
– ST-25D = complete cook cycles counted
• ST-26 Reset All Stats
5 5..6 6 D Do o N No ott D Diissttu urrb b
Time periods of peak operations during which the “FILTER NOW?” message will not
appear, may be programmed into the fryer. There are three groupings of days -
Monday thru Friday (M-F), Saturday (SAT), and Sunday (SUN). Within each day
grouping, up to 4 time periods (M-F 1 thru M-F 4, SAT 1 thru SAT 4, and SUN 1 thru
SUN 4) may be programmed. A time period may be anywhere from 1 to 180 minutes
in length.
1 1))
Press and hold the program button for 5 seconds until “LEVEL 2” “SP PROG”
“ENTER CODE” shows in the display.
2 2))
Press the program button once more and “DO NOT DISTURB” “ENTER CODE”
flash in the left display.
3 3))
Enter code 1, 2, 3.
4 4))
“DO NOT DISTURB ENABLED?” flashes in the left display and “YES” or “NO”
appears in the right display. Press the up or down buttons to choose “YES” or
“NO”.
5 5))
Press the program button and “M-F 1” shows in the left display and the time
flashes in the right display. Press the up or down arrow, or product buttons, to
change the time.
6 6))
Press the program button and “M-F 1” shows in the left display and “A” or “P”
flashes in the right display. Use the up or down arrow to choose AM or PM.
7 7))
Press the program button and “M-F 1” shows in the left display and far right
character display flashes. Press the product buttons to enter amount of time (up
to 180 minutes) during which filtering will be inhibited, after time entered in step
5.