Henny Penny Evolution Elite EEG-16 Series, Technical Manual

Page: 31 / 98

Level
2
Programming
19
C Ch ha ap ptte err 5 5 L Le evve ell 2 2
P Prro og grra am mm miin ng g
Used to access the following:
• Special Program Mode
• Clock Set
• Data Communication
• Heat Control
5 5..1 1 S Sp pe ecciia all P Prro og grra am m M Mo od de e
The Special Program Mode is used to set more detailed programming. Prior to
accessing individual program modes, see the following procedure.
1 1))
Press and hold the program button for five seconds until “LEVEL 2” followed by
“SP PROG” and “ENTER CODE” show in the display.
2 2))
Enter code 1, 2, 3, and “SP-1” “TEMP” “FORMAT” show in the displays.
NOTE:
• If a bad code is entered, a tone sounds and “BAD CODE” shows on the
display. Wait a few seconds, the controls revert back to the cook mode, and
repeat the above steps.
• To exit from the Special Program Mode at any time, press and hold the
program button for 2 seconds.
• Use the left arrow to go back to previous menu items.
• Press the right arrow when finished with current Level 2 step.
T Ta ab blle e 5 5--1 1 S Sp pe ecciia all P Prro og grra am m M Mo od de ess
S SP P--1 1 Temperature: Degrees Fahrenheit or Celsius
S SP P--2 2 Language: English, Greek “EΛΛHNIKA”, Russian “РУССКИИ”,
Swedish “SVENSKA”, German “DEUTSCHE”, Portuguese “POR-
TUG.”, Spanish “ESPANOL”, or French “FRANCAIS”.
S SP P--3 3 System Initialization (Factory Presets)
S SP P--4 4 Audio Volume (Loudness)
S SP P--5 5 Audio Tone (Frequency)
S SP P--6 6 Melt Cycle Selection - 1.LIQUID; 2.SOLID
S SP P--7 7 Idle Mode Enabled - YES or NO
S SP P--7 7A A Use “0” for IDLE
S SP P--7 7B B Auto Idle Minutes