Henny Penny Evolution Elite EEG-16 Series, Technical Manual

Page: 36 / 98

Level
2
Programming
24
5 5..1 1..8 8..2 2..2 2 F Fu ullll V Va att
1 1))
If unit is a full vat, “SP-8A” and “FULL VAT FILTER CYCLES” shows in the left
display, and the number of cook cycles between filters shows on the right
display (0 to 99).
2 2))
Use the up or down arrow to change this value.
3 3))
Press the right arrow and “SP-8B” “FILTER LOCKOUT ENABLED?” shows in
the left display. Press the up or down button to choose “YES” or “NO”.
4 4))
If set to “YES”, press the right arrow and the left display shows “SP-8C” “FULL
VAT LOCKOUT CYCLES” and the number of cook cycles before filter lockout
shows on the right display (0 to 99).
5 5))
Use the up or down arrow, or product buttons, to change this value.
6 6))
Once this number of cook cycles is reached, “FILTER LOCKOUT”/”YOU
*MUST* FILTER NOW”, shows in the display; more cook cycles are refused
until vat is filtered.
5 5..1 1..9 9 S SP P--9 9 P Po olliissh h D Du urra attiio on n
1 1))
Press and the release the right arrow until “SP-9 POLISH TIME” flashes in the
left display.
2 2))
Press the up or down arrow, or the product buttons, to change the polish time,
from 0 to 10 minutes.
5 5..1 1..1 10 0 S SP P--1 10 0 C Ch ha an ng ge e F Fiilltte err P Pa ad d R Re em miin nd de err T Tiim me e
1 1))
Press and release the right arrow until “SP-10 CHANGE PAD REMINDER”
flashes in the left display.
2 2))
Press the up or down arrow, or the product buttons, to change the time from 0 to
100 hours.
5 5..1 1..1 11 1 S SP P--1 11 1 C Clle ea an n--O Ou utt T Tiim me e
1 1))
Press and release the right arrow until “SP-11 CLEAN-OUT TIME” flashes in left
display.
2 2))
Press the up or down arrow, or the product buttons, to change the time, from 0
to 99 minutes.
5 5..1 1..1 12 2 S SP P--1 12 2 C Clle ea an n--O Ou utt T Te em mp pe erra attu urre e
1 1))
Press and release the right arrow until “SP-12 CLEAN-OUT TEMP” flashes in
the left display.
2 2))
Press the up or down arrow button, or the product buttons, to change the
temperature, from 0 to 195°F (-18 to 90°C).
5 5..1 1..1 13 3 S SP P--1 13 3 C Co oo okkiin ng g U Usse err IIO O
1 1))
Press and release the right arrow until “SP-13 COOKING USER IO” flashes in
the display.
2 2))
Press the up or down arrow to choose “SHOWPREV” or “SHOW- - - -”.
3 3))
Setting SP-13 to “SHOWPREV” means after a cook cycle, the display shows the
last menu item cooked. “SHOW- - - -” means after a cook cycle “- - - -” shows in
the display and a menu item needs selected before starting the next cook cycle.