Henny Penny Evolution Elite EEG-16 Series, Technical Manual

Page: 40 / 98

Level
2
Programming
28
6 6))
Press the right arrow and “CS-2 ENTER TIME” flashes in the left display and
“AM” or “PM” flashes in the right display. Use the up or down arrow to choose
“AM” or “PM”.
7 7))
Press the right arrow and “CS-3 TIME FORMAT” flashes in the left display and
“12-HR” or 24-HR” shows in the right display. Use the up or down arrow to
choose a 12-hour time format or a 24-hour time format.
8 8))
Press the right arrow and “CS-4 DAYLIGHT SAVING TIME” flashes in the left
display. Use the up or down arrow to choose daylight saving time for your area:
1.OFF; 2.US (2007 & after); 3.EURO; or 4.FSA (US before 2007).
9 9))
Press and hold the program button to exit.
5 5..3 3 D Da atta a L Lo og gg giin ng g,, H He ea att C Co on nttrro oll,, T Te ecch h,, S Stta att,, & & F Fiilltte err
C Co on nttrro oll M Mo od de ess
The Data Logging, Heat Control, Tech, Stat and Filter Control Modes are advanced
diagnostic and program modes, mainly for Henny Penny Corp. use only. For more
information on these modes, contact the Service Department at 1-800-417-8405 or 1-
937-456-8405.
5 5..4 4 T Te ecch h M Mo od de e
The TECH Mode has self-diagnostic information, which can be used by certified
technicians for troubleshooting purposes, such as:
• T-1 Software
• T-2 Fryer Type (Gas or Elec.)
• T-3 Push Button Test
• T-4 All On Display Test
• T-5 Display Segment Test
• T-6 Display Digits Test
• T-7 Display Decimal Point Test
• T-8 LED’s Test
• T-9 Left Temp. Probe Calibration & Offset
• T-10 Left Level 1 Probe Calibration & Offset
• T-11 Left Level 2 Probe Calibration & Offset
• T-12 Right Temp. Probe Calibration & Offset
• T-13 Right Level 1 Probe Calibration & Offset
• T-14 Right Level 2 Probe Calibration & Offset
• T-15 CPU Control Temp. Calibration/Offset/Highest
• T-16 View A - D Channel