Henning GmbH & Co. KG
page 8
19/02/2019
6
Operating the Evaluation unit MSM12
Generel Advice
Please protect the evaluation unit MSM12 against dust, moisture and impact. We recom-
mend the optional protection case made from padded cordura, incorporating a large trans-
parent window.
Protection Bag
Order Code 455099
6.A Charging the Batteries
When switched on, the main screen shows
the batterie’s current state of charge. Please
charge the batterie as soon as the battery status changes to red status. During charging,
the charge control changes to continuously red light.
Important notice: Please switch the unit off while charging, as otherwise most of the
energy will be used up for the operation of the unit.
6.A.1 USB-Adapter
For charging via USB-connection, please connect the MSM12 with the USB-cable to the
charging adapter and connect the adapter to the main power supply. Charging will take,
depending on the state of the batteries, between 9 and 18 hours.
6.A.2 Qi-Charging
For charging via Qi-interface, please connect the Qi-charger to the USB charging adapter.
Place the evaluation unit MSM12 onto the center of the charger, main screen facing away
from the charger. If positioned correctly, the charge control will change into active mode and
the Qi-charge indicator will be activated after ca. 2 seconds. Charging will take up to 9 hours.
