Henning GmbH & Co. KG
page 20
19/02/2019
The evaluation unit must be fed the payload of the installation. Please enter it by utilizing
the topmost key. A dialogue box will open; please enter the value and save by pressing the
“disk-key”.
Afterwards, please install the rope load sensors onto the ropes above the car and press the
middle key to determine the weight of the car. Please proceed in the same way with deter-
mining the counterweight.
As soon as the unit has been fed all values, the current counterweight compensation will be
shown as a percentage. This factor has been calculated according to the following formula:
[Compensation-Factor] = ([Counterweight]
– [Car Weight]) / [Rated load]
As soon as you leave the dialogue by pressing the key “save”, you can allocate an additional
measurement-ID permanently in the unit and issue reports via the PC-software.
Save
Cancel
Rated load
Cabin weight
Counterweight
Compensation factor
