Henning GmbH & Co. KG
page 17
19/02/2019
6.F.1 Unit Info
This function shows the user alongside general information like serial number and date the
hard- and software installed on this particular unit as well as the date of the last calibration.
The options “Synchronisation Module” and “Sync-Master” will be available from the year
2015.
6.G Rope Adjustment Wizard
The rope load wizard will assist you with the uniform adjustment of the ropes. For this pur-
pose the wizard uses the current rope loads as the actual state and calculates a new setpoint
load for each rope. The changed load distribution in the ropes is already taken into consid-
eration when readjusting one of the ropes. Due to a special algorithm it will be possible that
all ropes bear the same load after only one adjustment run. Also, during each adjustment
process the wizard determines a reference rope which does not have to be adjusted (rope
4 in the illustration). The rope load wizard will only be activated when two or more sensors
are connected.
Hardware options:
Internal memory
8 GB
Battery charge
4,5 Ah
Bluetooth
QI-charging
Sync-master
Software options:
Curve storage during the ride
Counterweight compensation measurement
Sync-master
Serial no.:
00623459
Last calibration:
15.04.2012
Last Calibration was
more than 365
days ago!
