Installation Instructions and Instructions for Use
Subject to technical modifications
–
Date of Issue March/2021
13
Servicing, maintenance and repair
An unintentional switching on of units with motor drive is possible. Make
sure that the automatic control device is switched off and that the
current supply is interrupted during cleaning or maintenance work. If the
unit is operated manually, the operating crank handle must be
unhooked and kept in a safe place.
Mortal danger and property damage due to sudden movements of
the mechanical system!
Cleaning
As a sun protection device fixed outside, the unit can get dirty in the
course of time. This will not reduce the usability of your unit. The
powder-coated parts of your unit will remain presentable for longer, if
they are cleaned regularly with a soft woollen cloth.
Do not use
solvents, alcohol (rubbing alcohol) or scouring cleansing
agents!
Remove regularly dirt or objects
- from the guide rails of the VENTUR SIDE,
- from the rain gutter and the water entry openings facing towards the
column,
- from the water discharge openings at the bottom of the column,
- from the operating radius of the slats,
- from
the
slats.
Installation Instructions and Instructions for Use
14
Subject to technical modifications
–
Date of Issue March/2021
Servicing, maintenance and repair
Maintenance
All inspection and maintenance works must be carried out by a
specialised company from HELLA or a HELLA partner. Regularly check
the electrical wires of motor driven units for damage. Check the
mechanical parts of your unit for visible damage. After exceptional
events such as storm, hail, sleet, maloperation or the like, the unit must
be checked for noticeable damage prior to operating it. If the unit is
damaged, it must not be used; consult authorized specialist staff
immediately. It is recommended to have the unit maintained by
specialist staff on an annual basis. This way wear is detected at an
early stage and damage to the unit is prevented.
Repair works
Improper repair works may cause both risk of injury to persons or
damage to the units. All repair works must be carried out by a
specialised company from HELLA or a HELLA partner. Use original
HELLA spare parts only.
Installation Instructions and Instructions for Use
Subject to technical modifications
–
Date of Issue March/2021
15
Operating guidelines
VENTUR
Motor drive
The slats are tilted by activating a radio transmitter or an automatic device.
The slats can be tilted in a range of 0-120°.
Operating the unit with ONYX:
For information regarding the operation and programming of the unit and
details on sensors see chapter “Operating and configuring Pergola PLUS
with ONYX”.
Operating the unit with Somfy io:
For information regarding the operation and programming of the unit see
the provided documentation by the manufacturer. For details on additional
sensors see chapter “Sensors Somfy io”.
Automatic control devices may fail under extreme conditions (e.g. power
failure or technical faults).
Lighting
By activating a radio transmitter or an automatic device you can switch the
lighting on or off.
Operating the lighting with ONYX:
For information regarding the operation and programming see chapter
“Operating and configuring Pergola PLUS with ONYX”.
Operating the lighting with Somfy io:
For information regarding the operation and programming of the unit see
the provided documentation by the manufacturer.
Installation Instructions and Instructions for Use
16
Subject to technical modifications
–
Date of Issue March/2021
Operating guidelines
Hand-held radio transmitter with scroll wheel
Setting the scroll wheel function with hand-
held radio transmitter “Somfy
Situo 5 Variation A/M io”:
- Open the rear housing cover
-
Set the selector switch for the operating mode “E” to position 2
In this way the scroll wheel reacts to the LED lighting and heating. You will
find detailed information in the enclosed instructions of the manufacturer.
2
E
