Installation Instructions and Instructions for Use
Subject to technical modifications
–
Date of Issue March/2021
57
Mounting the covering profiles
Mounting the standard
covering profiles (3) and the
extended covering profiles
(4):
Swing the covering profiles
on side H and side V in the
rain gutters (2) and seal the
lateral contact surfaces
towards the rain gutter
profile with silicone (1).
For side H always the
standard covering profile (3)
is mounted.
Depending on the
projection of the VENTUR,
either the standard covering
profile (3) or the extended
covering profile (4) is
mounted for side V.
The correct covering
profiles are automatically
included in the delivery.
A
B
C
D
H
V
L
R
1
/
2
3
4
Installation Instructions and Instructions for Use
58
Subject to technical modifications
–
Date of Issue March/2021
Mounting the covering profiles
Fix the covering profiles with screws (5) to the rain gutter profiles of the
side L and the side R.
V
H
B
C
V
5
5
3
3
5
3
4
3
2
5
4
/
4
3
3
Installation Instructions and Instructions for Use
Subject to technical modifications
–
Date of Issue March/2021
59
Mounting the covering profiles
Legend
Apply silicone
C Column C
Rain gutter
D Column D
Covering profiles, standard
L Side L
Covering profiles, extended
R Side R
Self drilling head screw 3.9x19
V Side V
A
Column A
H Side H
B
Column B
Mount marked oval head drilling screws (5) bare/electrically conductive. Applies to
all connections of covering profiles with rain gutters.
Installation Instructions and Instructions for Use
60
Subject to technical modifications
–
Date of Issue March/2021
Installation of the basic profile units
The cables of the linear motors (5), which come out of the inside of the left
and right basic profiles, must protrude on side V. The distance from the
edge between the first swivel bolt and the mitre edge facing towards side
H is~170 mm.
~170
H
3
5
3
2
2
~170
~170
A
B
C
D
H
V
L
R
V
