Installation Instructions and Instructions for Use
Subject to technical modifications
–
Date of Issue March/2021
69
Installation of the slats
At that, the following steps must be
carried out on both sides:
- Extend the driving rod (3) up to a
distance of approx. 100 mm (see
illustration on the previous page).
- Push the slide bushes ø16x16 mm (1)
onto the slat pins.
- Put the slat with the bearing bolt (2)
from above into the driving rod (3).
- Turn the swivel lug (4) upwards and
hinge it into the swivel bolt (5).
- Push the flanged bushing (6) into the
swivel bolt.
- To avoid slipping, fit the retaining ring
(7) onto the swivel bolt.
Carry out these steps for all slats.
Legend
Slide bush ø16x16 mm
Bearing bolt
Driving rod
Swivel lug
Swivel bolt
Flanged bushing
Locking ring
7
6
5
4
Installation Instructions and Instructions for Use
70
Subject to technical modifications
–
Date of Issue March/2021
Mounting the push bar clip profile
Insert driving-rod clip
profiles (delivery length 1 m
each). Cut the remaining
part to size and insert it.
Secure the driving-rod clip
profile with bolts, if required.
Legend
Clip profile of the driving rod
Driving rod
1
2
Installation Instructions and Instructions for Use
Subject to technical modifications
–
Date of Issue March/2021
71
Adjusting the rain gutters
Screw the supporting yoke
for the rain gutters (3) to the
rain gutter (1) as shown in
the illustration. Correct the
sagging of the rain gutter by
adjusting the screw (4).
A batten (2) may be used
as auxiliary tool.
3
4
1
2
3
4
5
Installation Instructions and Instructions for Use
72
Subject to technical modifications
–
Date of Issue March/2021
Adjusting the rain gutters
Between the rain gutter and
the slats a minimum
distance (at least 5 mm)
must be given, otherwise
the profiles clash when the
slats are tilted.
Legend
Rain gutter
Batten
Supporting yoke for rain gutter
Self-drilling head screw M8x40 mm
Rivet nut M8
Slat
>5
1
3
6
4
