Installation Instructions and Instructions for Use
Subject to technical modifications
–
Date of Issue March/2021
145
Sensors Somfy io
General
If multiple sensors are to be taught-in in the pergola, the io control
processes the following priority sequence:
1. Integrated frost monitoring (switch 4 must be set to ON)
2. Wind
sensor
3. Rain
sensor
4. Temperature and sun sensor (comfort sensors)
The integrated frost monitoring has always the highest priority. If the
temperature is below the adjusted threshold value, all manual or automatic
commands are ignored. The slats move to the position, which was set at
the first use. In these cases, the central home control systemsTaHoma
Premium Box io, Connexoon io or Nina io show the message, that the unit
is in its safety position and locked.
The temperature and sun sensor are comfort sensors with the lowest
priority. Via the TaHoma Box for example, different scenarios can be
created. Exemplary scenario: If temperature “x” and sun value “y” are
exceeded, the slats move to the d
esired position “z”.
Installation Instructions and Instructions for Use
146
Subject to technical modifications
–
Date of Issue March/2021
Commissioning/functional check
Extend and retract the unit in and out completely. When extending the unit
for the first time, make sure no one is in the operating radius or standing
below the unit.
Make sure that during the later operation the units can be extended freely
and without blockings. Do not extend the unit, if objects or persons are in
the operating radius of the sun protection unit. Please observe the safety
instructions.
After the first extending check the mounting material and the construction
elements for strength.
Automatic control devices or switches, that are not in the operator's field of
vision, may not be used for test runs of motor driven units.
We recommend the use of a test cable for the provisional operation of the
motor.
Check all settings.
Check all screwed connections for tightness.
Clean the elements (see maintenance instructions).
Pass these instructions as well as possible instructions of the motor,
switch and control manufacturer on to the user.
Brief the user, whereupon you provide comprehensive information on the
safety and user instructions of the system.
Have the correct design of the system as well as the installation and
briefing with the safety information confirmed in writing (see handover
report).
Installation Instructions and Instructions for Use
Subject to technical modifications
–
Date of Issue March/2021
147
Removal
Switch the unit dead and take safety precautions against unintentional
switching on.
The removal is carried out in reverse order to the installation.
Installation Instructions and Instructions for Use
148
Subject to technical modifications
–
Date of Issue March/2021
Handing over report (for the fitter)
Dear Customer,
We are glad that you have opted for a HELLA brand product. Our units are fabricated with
greatest care and many years of experience.
The instructions for use and the installation instructions have been handed over and must
be read before using the product.
An introduction has taken place.
The safety instructions were pointed out.
Your product
Pergola VENTUR / VENTUR SIDE
was manufactured in accordance with EN 13561:2004+A1:2008
and was installed professionally and handed over
on the .................................................................................................................................... .
Dealer
Name
Place
Postal code
Date
Name
Street
Customer
Place
House number
Signature
Signature
Date
First name
