HELI green Series Operator'S Manual Download

Page: 2 / 82

FOREWORD

This manual provides the proper operation to operator, service man and

administrative person of the reach truck. Read this manual carefully before operation

to exert the capacity and enhance efficiency of reach truck.

The manual is based on truck with standard equipments, other kinds of truck is

explained only in different parts.

If you have any questions during using, please contact with HELI specified sale

point for service.

This manual content might not correspond with the actual truck because of the

improving of our products and using method.

Dangers during operation, inspection and maintenance can not be predetermined

and monitor by us in user actual operation.

For the operation, inspection and service not listed in the manual, please take

into consideration by yourself for safety reason.

Symbols are corresponding meanings used in the manual and truck plates are

followed:

Symbol

Meaning

DANGER

Indicates an imminently hazardous situation which, if not avoided, will

result in death or serious injury. You must observe this instruction.

WARNING

Indicates a potentially hazardous situation which, if not avoided, could

result in death or serious injury. You must observe this instruction.

CAUTION

Indicates a potentially hazardous situation which, if not avoided, could

result in minor or moderate injury. You must observe this instruction.

NOTE

Indicates a statement of directly or indirectly related to the safety of

personal and maintain of the truck.

Summary of Contents for green Series



















































































Search results

Summary of Contents for green Series

Reviews:

Related manuals for green Series

Brands by name

Popular brands

HELI green Series, Operator'S Manual

Search results

Summary of Contents for green Series

Reviews:

Related manuals for green Series

Brands by name

Popular brands