HELI green Series Operator'S Manual Download

Page: 73 / 82



Tighten the connecting bolts between the frame and mast ;



Tighten the main bolts of the frame and mast.

Inspection, adjusting and replacement should be done by HELI specified service

point according to HELI periodic inspection service contact.

(6) Annually inspection (2400h)

Inspect the following items in addition to the inspection prior to operation,

weekly inspection, monthly inspection, every three monthly inspection and annually

inspection:



Measure the natural downfall distance of the lift cylinder ;



Check if the friction disc of the brake is worn and shakes;



Check if the R area of the fork is cracked.

(Color filter inspection)

The annually inspection must be carried out as mentioned above.

In addition, this inspection must be carried out by the approved service and

please accomplish inspection at the HELI specified service point.

(7) Periodic inspection time table

The table is based on standard working time and condition. When the working

time and condition are different, please do the inspection, adjustment and replacement

earlier (

●

means replacement or replenish)

Summary of Contents for green Series



















































































Search results

Summary of Contents for green Series

Reviews:

Related manuals for green Series

Brands by name

Popular brands

HELI green Series, Operator'S Manual

Search results

Summary of Contents for green Series

Reviews:

Related manuals for green Series

Brands by name

Popular brands