50
mast to the max. position.
When driving with load, refer to capacity chart. Lift the fork 30cm above the
ground and tilt the fork to the max. position.
5. Transporting of the truck
CAUTION:
When transporting with lorry:
Wedge the four wheels and fix the truck with rope to prevent the truck
from moving.
When load up, unload or drive on road, pay attention to its overall
length, overall width and overall height and so on. remember to obey
correlative law.
6. Note on get onto or get out of the lorry
CAUTION:
Never steering or move transverse in connecting board to prevent any
dangerous.
Use connecting board with enough width, length and intensity.
Apply the parking brake of the lorry and wedge up its wheels.
Be sure the connecting board fixed in the center of the lorry. Make sure there is
no grease on the connecting board.
Keep the right and left side of the connecting board at the same height for
convenient of getting on and out.
When getting on, travel backward to make the right and left tyre land at the same
time.
CAUTION:
When sling the truck:
Only qualified people are allowed to sling the truck.
Hook the rope at the appointed position of the truck.
Summary of Contents for green Series
