51
All rope should have enough strength.
The knock-down parts of the truck have its appointed sling position also.
7. Operation of the truck
(1) Start the truck
CAUTION:
When starting the truck (turn on the key switch), stand rightly in the cab.
Be sure there is no one around.
a) Turn on the key switch. (The meter begins working.)
b) Hold the steering wheel knob.
c) Lift the fork to be 30cm above the ground.
d) Draw back the working device.
e) Tilt the working device backward.
(2) Travelling
CAUTION:
Ensure the safety around with eye and sound the horn before driving
。
Slow down in the following condition:
a) in sharp turning;
b) in narrow road
c) on bad road
d) when near the goods or obstacle
When travelling backward, it is dangerous to depend on back view mirror only.
Face backward and travel after a direct check of the backward.
Operate on the forward and backward switch. Step on the acceleration pedal and
the truck begins to travel. Travel speed increase with the decrease of the pedal angle.
(3) Steering
CAUTION:
When steering, the rear part of the truck rotates to the outside greatly.
Summary of Contents for green Series
