HELI green Series, Operator'S Manual

Page: 67 / 82

64
g) Inspection of front wheel(supporting wheel)
Check if the front wheels are wear, crack and damaged.
h) Inspection of pipelines and cylinders
Check if pipelines and cylinders (lift cylinder, tilt cylinder , reach cylinder) leak.
i) Inspection of driving wheel
Check if driving wheels are wear, crack and damaged.
j) Inspection of auxiliary wheels
check if the auxiliary wheels are wear, crack and damaged.
k) Inspection of hydraulic oil
Check if hydraulic oil level is in a prescriptive range.
Open the cover and pull out the oil dipstick. Clean the dipstick with clean cloth
and insert into oil tank again. check the oil level, it should stay between “H” and “L”.
NOTE:

Check the oil level on flat ground.
l) Inspection of brake pedal
Press and depress the brake pedal to check if the return of brake pedal is normal.
m) Inspection on steering clearance
Turn the steering wheel clockwise and anti-clockwise slightly and check if there
is enough steering clearance. Check if the steering wheel is loose up and down.
Steering clearance: 20~30mm.
n) Inspection of meter
When the key is ON, make sure the meter is normal.
o) Inspection of horn
Press the horn check if it sounds.
p) Inspection of all levers
Operate all levers 2or 3 times and check if fork and mast works smoothly and if
there is abnormal sound.