10
Operator should inspect the truck before operation and if there is any fault, report
to administrative person.
(2) Inspect regularly and make a record.
Inspect monthly and annual, repair it immediately if there is any fault. the
inspection should be carry out by professionals because special technique and
equipments are needed. The record of inspection must be saved three years.
(3) Change the important parts regularly.
Name of safety parts
Term
1
Pipe for lifting system
1~2
2
Chain s of lifting
2~4
The items listed above must be replaced for a fixed period because they are very
important for safety.
(4) It is strictly prohibited to operate fault truck.
Before driving you should check truck carefully. If there is any fault, hang a
warning plate on the truck and then remove the key and report to the administrative
person.
(5) Assign a guider for truck maintenance and attachments working
Assign a guider and do according to his command.
The truck body and parts are heavy and some place have high pressure. Be care
when repair.
Summary of Contents for green Series
