26
It is not allow to unload the goods at high height position of forks by other trucks.
When the loads is off center, it could lead to overturn the truck and falling loads. Do
not hold down the loads by hands. There is a danger of load’s falling.
(23) Do not press the goods by people sitting on the goods.
Do not press the goods by people sitting on the goods. The truck may have
unpredictable moving and goods may falling down. It is very dangerous.
(24) Prohibition of stacking and unstacking goods when the forks lift up high.
Do not stack and unstacke goods when the forks lift up high. It is dangerous
when stacking and unstacking loads by the movement of truck. it leads to damage of
loads or overturning of truck.
(25) Prohibition of reaching movement when the goods approach the floor.
Do not reach forward or backward when the loads approach the floor.
(26) Do not push or pull the goods with reach movement.
Do not push or pull the goods with the cylinder force.
(27) Do not lift goods with steel wire directly hooked on the fork.
It is very dangerous when lifting goods with steel wire directly hooked on the
fork or attachment because steel rope may be cut or fall.
Truck may rotate to both sides when lifting goods with one fork. It is very
dangerous.
Please use hook or cantilever hanger to hang up goods.
When steel wire or rope is used, choose one with enough strength according to
goods weight. Make sure the steel wire or rope is short as possible and hanging angle
Summary of Contents for green Series
