Issued September 2017
On-Route Operation Procedures
Copyright 2017, Heil Environmental
Printed in U.S.A.
117
DuraPack
®
5000
LOADING REFUSE WITH A REEVING
MECHANISM (CONTINUED)
d. PUSH the upper panel and blade levers at the
same time and RELEASE the levers. The levers
will self-center at the end of the commanded
position by way of valve internal hydraulic
pressure. See
.
e. The upper panel and blade move and compact
the refuse into the body.
4. Repeat Steps 1 and 3 as necessary to compact the
refuse.
5. Leave the blade against the refuse.
DANGER
Do not use riding step when vehicle speed is more than 10
MPH or to travel more than 2 tenths (0.2) of a mile. Do not
use riding step when vehicle operates in reverse. Always
face vehicle when using riding step.
DANGER
Do not ride on or in the hopper opening. Use riding step
and obey all safety messages.
6. Each helper must PRESS the buzzer on their side of
the tailgate and let the driver know each helper is
ready to move to the next location.
7. Go to the next stop on the route.
111
Summary of Contents for DuraPack 5000 2017
