HEIL DuraPack 5000 2017, Operation Manual

Page: 81 / 204

Issued September 2017
Controls, Switches, and Indicator Lights Copyright 2017, Heil Environmental
Printed in U.S.A.
73
DuraPack
®
5000
OPTIONAL OUTSIDE CONTROLS
The optional outside controls include levers to operate the
optional hydraulic equipments such as:
Reeving mechanism
Winch
Arm mechanism
Roll bar
Cart tipper
There are several combinations of optional equipment. The
controls for optional equipment are usually located on the
curb side of the unit, but may also be located on the street
side of the unit. You must become familiar with the optional
equipment and their controls that are on your unit. See the
figure to the right.
You must secure the refuse bin with the latch bar before
you lift the refuse bin with any of the optional container lift
equipment except the arm mechanism and the cart tipper.
An additional throttle advance toggle switch is installed
when there is at least one optional lifting equipment. The
switch is a momentary switch which means that you must
PRESS and HOLD the switch to increase the engine
RPMs. It is located on the same plate as the buzzer. The
engine RPMs decrease as soon as you stop pressing the
switch. You use the switch to increase the RPMs of the
engine which increases the hydraulic oil flow. The
increased flow of hydraulic oil increases the speed of the
optional lifting equipment.
Figure 49. Optional Container Lift
Controls (1 of 2)
Figure 50. Optional Container Lift
Controls (2 of 2)