HEBU medical HB9307, Operating Manual

Page: 32 / 40

Airborne 360°-300 / Airborne 360°-300UV Air purification unit
32
EN
8.3 Setting the clock
1. The clock is set by sequentially selecting the fieldswith the
button and setting the values with thebutton or .
2. Confirm with the button .
HINWEIS!
- The clock has a built-in battery and does not need tobe reset every time you turn it on.
- The battery life is from 5 - 10 years and may only bereplaced by qualified personnel.
8.4 Automatic mode
In automatic mode, two separately programmable on/off cycles are
available to the operator.
Automatic operation is switched on by pressing the button several
times, until the MANUAL field is reached. Then press the button
, to
select AUTO and confirm with the button .
The on/off cycles are programmed by sequentially selecting the fields
with the button
, whereby the values areselected with or and
confirmed with the button .
The return to the manual mode is made by successively scrolling through all the fields, by pressing
the button ,until the AUTO field is reached. Then press
to select MANUAL and confirm with the
button .
NOTE!
- Switching on/off is always possible via the mainswitch on the rear of the unit. The next
time the unit isswitched on, the operating mode last set is active.
- Changes are made by successively scrolling throughall fields, by pressing the
confirmation button, until theAUTO field and by a final confirmation.