57
Rev. 05/2020
Ash Auger Tube
Principles
The ash auger tube is a six inch diameter tube that
extends from the rear of the ash pan, to approximately
four inches past the cladding of the HEATMOR™. This
extension allows placing a container under the tube to
catch the ashes.
Ash Auger Tube Cover Plate
Principles
The auger tube cover plate is a round plate that is secured
onto the end of the ash auger tube, creating an airtight
seal.
Operation
1)
When removing ashes, always turn off
combustion air blowers.
2) Remove the two thumb nuts.
3) Insert the ash auger and remove the ashes.
4) Replace the ash auger tube cover plate and securely
tighten the two thumb nuts.
Ash Auger Tube Cover Plate
Removal of Ash Auger Tube
Cover Plate