Heatilator • Caliber CD Series • 4040-263 Rev M • 06/08
8
Decorative Doors
(not shown)
Section 2.E.
Fixed Glass Assembly
(not shown)
Section 2.F.
Grate
(not shown)
Section 3.B.
Mantel
Hearth
(not required)
Clear Space
Section 2.D.
Fan Kits
Section 2.C
Figure 2.1 General Operating Parts
B. Your Fireplace
WARNING! DO NOT
operate
fi
replace before reading and
understanding operating instructions. Failure to operate
fi
replace according to operating instructions could cause
fi
re or injury.
If you expect that small children or vulnerable adults may
come into contact with this
fi
replace, the following precau-
tions are recommended:
A. Gas Fireplace Safety
• Install a physical barrier such as:
- A
decorative
fi
rescreen.
- Adjustable safety gate.
• Install a switch lock or a wall/remote control with child
protection lockout feature.
• Keep remote controls out of reach of children.
• Never leave children alone near a hot
fi
replace, whether
operating or cooling down.
• Teach children to NEVER touch the
fi
replace.
• Consider not using the
fi
replace when children will be
present.
Contact your dealer for more information, or visit: www.
hpba.org/staysafe.
To prevent unintended operation when not using your
fi
replace for an extended period of time (summer months,
vacations, trips, etc):
• Remove batteries from remote controls.
• Turn off wall controls.
• Unplug 3 volt adapter plug and remove batteries on IPI
models.
• Turn off gas controls valve on standing pilot models.
2
2
Operating Instructions
User Guide
HOT SURFACES!
Glass and other surfaces are hot
during operation and cool down.
Hot glass will cause burns.
• Do not touch glass until it is cooled
• NEVER allow children to touch glass
• Keep children away
• CAREFULLY SUPERVISE children in
WARNING
same room as appliance.
• Alert children and adults to hazards of high
temperatures.
High temperatures may ignite clothing or other
fl
ammable materials
.
• Keep clothing, furniture, draperies and other
combustibles away.
This appliance has been supplied with an integral
barrier to prevent direct contact with the
fi
xed glass
panel. Do NOT operate the appliance with the barrier
removed.
Contact your dealer or Hearth & Home Technologies if the
barrier is not present or help is needed to properly install one.
When lighting the pilot light on
fi
replaces with a standing
pilot, remove the
fi
xed glass assembly so you can detect
presence of residual gas build-up. See Standing Pilot
Lighting instructions and Maintenance Tasks.
