Heat & Glo • HE36CLX-S • 2183-900 Rev. H • 1/14
48
Figure 16.2 Door Latching Fasteners
F. Fixed Glass Assembly
WARNING! Risk of Asphyxiation!
Handle
fi
xed glass
assembly with care. Inspect the gasket to ensure it is
undamaged and inspect the glass for cracks, chips or
scratches.
•
DO NOT
strike, slam or scratch glass.
•
DO NOT
operate
fi
replace with glass removed, cracked,
broken or scratched.
•
Replace as a complete assembly.
Removing Fixed Glass Assembly
1. Remove the three 1/4 inch nuts on the bottom of the
glass frame. See Figure 16.2.
2. Use a Phillips screwdriver to turn the 1/4 turn latching
fasteners counterclockwise and pull the
fi
rebox out
approximately two inches.
3. Grasp the lower portion of the glass assembly and
pivot out and up.
Replacing Fixed Glass Assembly
1. Insert the top glass frame hook on the return bend on
the top side of the
fi
rebox. See Figure 16.3.
2. Pivot the bottom of the glass assembly toward the
fi
rebox.
3. Reinstall the three 1/4 inch nuts on the bottom of the
glass frame and tighten.
4. Push the
fi
rebox back into the outer shell.
5. Put the 1/4 turn latching fasteners back in place and
turn clockwise to tighten. Pull gently on the
fi
rebox to
verify the
fi
rebox is correctly secured and latched.
1/4 TURN LATCHING FASTENERS
1/4 INCH NUTS
TOP GLASS FRAME HOOK
RETURN BEND
Figure 16.3 Top Glass Frame Hook