HCI RM26ICS RoomMate, Operation Manual

Page: 25 / 40

-------------------------------------------------------------------------------------------ICS OPERATIONS MANUAL
HealthCare Information, LLC 25
FUNCTIONS
Functions are accessed by pressing the “FUNCTION” button on an IR remote. Each time the “FUNCTION” button is pressed
the next function will be displayed. After about 10 seconds of no activity the function screen will turn off. The functions are:
Information Displays current TV information
Sleep Timer Time left on the sleep timer. 0 = timer off.
Basic Selection Current Closed Caption type selection.
Zoom Mode Current zoom setting.
MTS Current MTS setting.
Channel no. Current channel being viewed.
Sound Mode Current sound mode
Picture Mode Current picture mode.
Clear Fav List? Clears favorites list.
Show Channel Info ?
OK Show channel number and label when channel is changed.
Cancel Do not show channel number and label when channel is changed
ALARMS
There are seven alarms that can be programmed. Press the “ALARM” button on the HCI IR remote control to access the
ALARM setup menu. Use the up/down arrow buttons to select the alarm number you wish to edit. Press the right arrow button
to edit the selected alarm. Alarm settings are:
Alarm Mode Determines what the alarm does. Selections are:
None – Daily On – Daily Off – Power On – Power Off
None Alarm off.
Daily On Turn on at set time every day.
Daily Off Turn Off at set time every day.
Power On Turn on at set time once.
Power Off Turn off at set time once.
Time Sets time alarm will occur. “Alarm Mode” can not be set to “None”.
Date Sets date alarm will occur. “Alarm Mode” must be set to “Power On” or “Power Off”.
Input Source Source set will use when turned on by alarm. “Alarm Mode” must be set to “Daily On” or “Daily
Off”. Selections are:
None – TV – SD/USB – VGA
Air/Cable Selects air or cable as TV source for Alarm “Input Source” must be set to TV
Channel No. Selects alarm turn on channel. “Input Source” must be set to TV
Volume Alarm turn on volume. Set to “0” to volume setting when set was turned off.
NOTE: Date and Time must be properly set for the alarms to function at correct time. See page 10 to set date and time.