HCI RM26ICS RoomMate, Operation Manual

Page: 23 / 40

-------------------------------------------------------------------------------------------ICS OPERATIONS MANUAL
HealthCare Information, LLC 23
USB Clone Saves and loads set setup information to a USB flash drive. Used to copy TV setup from one TV to
another.
Read Read and load setup date from a USB flash drive.
Write Write setup data to a USB flash drive.
NOTE: Only the USB port located on the rear jack panel can be used for the clone function.
To clone a set:
1. Insert a USB flash drive in to the USB port located on the rear jack panel.
2. Enter the setup menu. See page 10.
3. Go to the “OTHERS” menu and select “USB Clone”.
4. Select “Write” and press the enter button. Screen will display “USB Writing… Please Wait…” The
write process will take a couple of minutes.
5. When finished, remove the USB flash drive and install it into the set to be copied to.
6. Enter the setup menu. See page 10.
7. Go to the “Others” menu and select “USB Clone”.
8. Select “Read” and press the enter button. Screen will display “USB Reading… Please Wait…”
9.
Repeat steps 5-8 for all TV you wish to copy the setup to.
NOTE: You can copy the clone file to a PC or to additional flash drives.
All Reset Resets all setup information to factory defaults. Channel line up will also be reset.