HCI RM26ICS RoomMate, Operation Manual

Page: 21 / 40

-------------------------------------------------------------------------------------------ICS OPERATIONS MANUAL
HealthCare Information, LLC 21
¼ inch Sets operating mode of the pillow speaker jack. Selections are:
Pillowspeaker
Zenith – Puff-slip – Visitor Station – GEN4_R5 – GEN4_INTER – Philips
Zenith Pillow speakers sending Zenith digital code.
Puff-slip Sip and Puff device.
Visitor Station HCI Visitor Station
GEN4_R5 Curbell GEN 4 Pillow Speaker
GEN4_INTER HCI interactive pillow speaker
Philips Pillow speakers sending Philips digital code.
TV Max Vol Sets maximum sound level TV can be set to when Spk Mode is set to TV only.
PS Max Vol Sets maximum sound level TV can be set to when Spk Mode is set to Pillowspeaker.
NOTE: When Spk Mode is set to Both TV Max Vol setting will be used.
Spk Mode Set where should come from. Selections are:
OFF – TV – Pillowspeaker – Both
Input When on and a channel or input source is selected that there is no present for TV
AUTO-DET will return to previous source or channel after 15 seconds. Selections are:
On - Off
Serial Ctrl When on allows control of the TV through the RJ-12 serial port. Selections are:
On - Off
OP Change menu access password. Default is “9999”. To change:
Password
1. Enter old password. Selection will move to New PIN automatically.
2. Enter new password. Selection will move to Confirm automatically.
3. Re-enter new password. Selection will move to Return automatically.
4. Press the “ENTER” button.
Bank When On requires the OSD password to be entered before the bank can be change. The “B” button on
Switch the remote will only show the current selected Bank. When off the “B” button on the IR remote can be
Password used to change the current Bank at anytime. See page 21 and 32.
HDMI HDMI settings
Setting
HDMI Sets HDMI audio type. Selections are
Sound
Auto, HDMI, DVI
CEC Turns CEC control on or off. Settings are.
Control
On – Off
When on the following parameters can be set.
-Auto Power On
Set turns on when HDMI signal is detected
-Auto Power Off
Set turns off when HDMI signal stops.
-HDMI Device List
Can not be changed.