HBK 10M0, Mounting Instructions, Page: 10 / 106

C5
SCOPE OF SUPPLY AND EQUIPMENT VARIANTS
8
3. Bending moment bridges
You can purchase the force transducer with or without bending moment bridges (NB). If
you select the bending moment bridges option, the C5 comes with two electrically
isolated bending moment bridges.
The bending moments are recorded at 90 degrees to each other. Please note that no
characteristic value is specified for the bending moment bridges in the test report or in
the optional calibration certificate.
4. Transducer identification
You can purchase the force transducer with transducer identification (“TEDS”). TEDS
(Transducer Electronic Data Sheet) makes it possible to store the transducer data
(characteristic values) in a chip which can be read out by a connected measuring device.
With the double bridge version, or if you have selected optional bending moment bridges,
each measuring bridge is assigned its own TEDS.
See also section 9, page 18 .
5. Plug protection
On request, we can fit plug protection, consisting of a strong square tube, so that the plug
is protected against mechanical damage.
6. Plug version
The standard version of the force transducer is delivered with a bayonet connector. A
threaded connector can be supplied instead, if required. It is also possible to obtain the
force transducer with a fixed cable.