HBK 10M0, Mounting Instructions, Page: 9 / 106

7
C5
SCOPE OF SUPPLY AND EQUIPMENT VARIANTS
3 SCOPE OF SUPPLY AND EQUIPMENT VARIANTS
3.1 Scope of supply
S
C5 force transducer
S
C5 mounting instructions
S
Test report
3.2 Accessories (not included in the scope of supply)
Connection cable/ground cable Ordering number
Configurable connection cable for connecting the force
transducer to the bridge amplifier K-CAB-F
Connection cable KAB157-3; IP67 (with bayonet locking); 3 m
long, TPE outer sheath; 6 x 0.25mm²; free ends, shielded, outside
diameter 6.5 mm 1-KAB157-3
Connection cable KAB158-3; IP54 (with screw lock); 3 m long,
TPE outer sheath; 6 x 0.25mm²; free ends, shielded, outside
diameter 6.5 mm 1-KAB158-3
Loose cable socket (bayonet connection) 3-3312.0382
Loose cable socket (screw connection) 3-3312.0354
Ground cable, 400 mm long 1-EEK4
Ground cable, 600 mm long 1-EEK6
Ground cable, 800 mm long 1-EEK8
3.3 Equipment variants
The C5 force transducer always comes supplied with a thrust piece.
The force transducer is available in different versions. The following options are
available:
1. Nominal (rated) force
You can purchase force transducers with nominal (rated) forces between 5 MN and
20 MN. The nominal (rated) force is the force at which the sensor provides the rated out­
put specified on the type plate as the output signal.
2. Number of measuring bridges
You can purchase the force transducer with a single bridge (SB), in which case the C5
comes supplied with one measuring bridge. The double-bridge version (DB) is optionally
available. The C5 then comes supplied with two electrically isolated bridge circuits.