25
2
Move the universal clamping disc 4903-2 into the front
position and immediately connect the universal clamp-
ing disc with the safety spring vice 4900-2A with the
locking bar
2
(the locking pin of the locking bar must
be clicked into place) in order to prevent the universal
clamping disc from slipping.
Fit the universal tensioning jaw 4903-3
3
onto the safe-
ty spring Vice 4900-2 A. The locking pin must have
clicked into place. Fit the Safety Adapter
4
on the
Safety Spring Vice (drive) and mount it with the safety
chain onto the Base Support 4903-1.
ATTENTION
: If the universal tensioning jaw
4903-2 is not secured, there is a considerable
risk of injury when the base support is folded
down.
The HAZET universal spring vice is now ready for use.
Swivel the HAZET universal spring vice into a verti-
cal position by holding the universal clamping disc
4903-2 with one hand and by first loosening the
stop bolt lock
5
with the other hand and then swiv-
elling the device. Then loosen the stop bolt locking
6
and swivel the device completely into a vertical posi-
tion. Please make sure that the stop bolt locking
6
is
securely locked in.
(When swivelling from a vertical into a horizontal posi-
tion follow the instructions in the reverse order.)
ATTENTION
: Make sure you have a firm grip
and that the device is stable!
3
Design and function
3
4
5
6
Summary of Contents for 4903/2
